Great coverage, shiny and melts well for shrinkless sleeving. I used the black and navy blue for a subtle sleeve job; couldn't be happier!

Easy to use and error-free; this stripper does its job without hassle, partial strips or nicked wire. I used this on MFC custom 16AWG wire without any problems. My only complaint is that you can't adjust the wire stop close enough (4mm) for the minifit (PCI-E) pins, so you have...

I've crimped thousands of wires in my military career, but only a handful of molex (minifit) pins. I was never happy with the outcome, until I used this crimper. After studying Lutro0's videos, my first through last crimp was perfect! Each time the crimper provided flawless double-crimps that looked beautiful...

High quality 16 gauge wire; will exceed OEM wiring in all respects! Stranded, tinned, with thin wall insulation (appears to be irradiated PVC). This means it will cut clean, sleeves well, and handles soldering heat without creeping back or melting. It also will handle higher current than 18AWG wire with...

This is a great extractor, works great with a miss routed cable and you need to remove it form the connector, or you are going to sleeve the original cables on your PSU. I wish the prongs were a little bit harder, and finish in an agle, so they can...

It's mayhems of course it's one of if not the best. My only complaint is the bottle I got was different than the picture. I was expecting "blue berry" Instead just got "blue" not sure if this is normal but the coolant pictured looks much lighter than what I got....

Quality plug, fast shipping by Main Frame Customs. The EK logo comes unattached so you can orient it after installation of the plug. Be aware that if you purchase this for a recessed port, such as on the EK-RES X3 – TOP, it won’t work, it’s slightly too big to...

The EK-RES X3 – TOP is very nice. Appears to be machined out of aluminum. I purchased it to replace the include top with the EK-KIT S360, because the top that came with the kit wouldn't seal properly. The EK-RES X3 – TOP seals perfectly. Needed an EK-PLUG G1/4 to...

I didn't pay attention when I bought my EK XRES 140 Revo D5 PWM pump, which doesn't come with a way of mounting the unit unless you plan on panel or chassis mounting it via modding your case. This bracket is perfect, and let me mount it on a 140mm...

This valve works exactly as expected. I use it as a drain valve, capped off with a plug. No leaks at all, which is what the plug is there for just in case.

The UV lights are highly directional, it would be nice if they were more diffuse, and had more output. RGB lighting in the system can drown out the effect. Overall I'm happy with the uv lights. In the photo I'm running 3 sets of 5mm uv leds on the reservoir,...

The UV lights are highly directional, it would be nice if they were more diffuse, and had more output. RGB lighting in the system can drown out the effect. Overall I'm happy with the uv lights. In the photo I'm running 3 sets of 5mm uv leds on the reservoir,...

works and looks great.

I'm really glad I found these they are great

these fit and work pretty well