Stealth Cable Combs
Our Stealth cable combs are truly the last cable combs you will ever need. We have spent hours fine tuning in a comb that not only hugs the wires closely, but also provides the support and durability that your cables need.
The combs start its journey from a sheet of only the highest quality 1/8″ acrylic which provides the combs with its durability. The thickness of the acrylic also plays an important role so that the combs are not too thick compromising its stealthy look. The acrylic sheets are then cut by an extremely precise laser cutter which cuts out the combs from the sheet. The laser beam polishes the inner, and outside edges of the comb to provide an extremely smooth surface. Not every comb made however is perfect. Our very strict quality control eliminates combs that are not up to our high quality standards. We throw any and all combs away that fail our quality control test.
Unlike other combs which are 3D printed producing a fragile comb with rough edges, our stealth cable combs are built to last the life of your cables. With 10’s of thousands sold its no wonder!
Made in the U.S.A!
Our combs work great with our: Teleios sleeve, pre-sleeved wires, Custom Extension Cables, Coreless Paracord, as well as other 4mm PET sleeve types.
These combs are made to be installed before connecting your wires into your connectors. If you have cables already made however, you can purchase our Molex Extractor to easily extract the wires from the connector.
One comb per single quantity.
M0nst3rPupPY (verified owner) –
Great combs!
Perfect spacing between the cables and the comb is exactly the same width of the connectors.
M0nst3rPupPY –
Levi James (verified owner) –
I used these on every cable on every build I’ve done, and by far these really seal the deal in terms of management. Some of the larger gauge wires have difficulty fitting. I actually broke mine trying to force one through, making me scrap the other in favor of the clip-in style combs. All-around a flawless product, but don’t try to make it work if it doesn’t want to.
Levi James –
bonesgomoo (verified owner) –
Easy to use and look great! Just be gentle with them while feeding cables through. I had no problems getting my paracord through, although I did have something of a scare when I pushed the wrong way on one of the 24-pin combs. Scary cracking sound, but still functionally sound. Crisis averted.
bonesgomoo –
thetherington (verified owner) –
I found the cable combs very easy to use with 16awg wire and Teleios sleeving. I’m not sure why everyone has problems with fitting the combs over the sleeving, because mine are very loose. I can move them around easily even after the cables are installed. I would recommend to take the time to stretch the sleeving before you do the heatshrinkless method.
The 24pin is a bit brittle and i had snapped mine accidentally. Recommend to buy 1 or 2 extra for the 24pin. The other sizes are not so brittle.
thetherington –
ruff_hi (verified owner) –
These combs look really nice and are a close match for others that I have purchased.
Unfortunately, I couldn’t get the sleeved wire through the comb holes.
ruff_hi –
choouei (verified owner) –
Bought a few 24pin combs but sadly 1 was dead on arrival due to the distance covered that’s being taken to send here. Well I have some spares to work with 🙂
choouei –
[email protected] (verified owner) –
These combs look great and keep the wires in place very well. I did have two minor issues. Using the 16 guage wire and telios sleeving from MFC, sometimes I would get the sleeving too tight and the wires would be fairly loose in the comb. The 24 pin combs are also very fragile, so don’t push on them when you are plugging in the cable.
[email protected] –
Gabriel (verified owner) –
We’ve been ordering this Cable Combs for over 2 years now. Not sure about the previous reviews about them breaking easily. We haven’t have a single issue with it. They look great and give your System the Unique Look of a Awesome Cable Management Job. I definitely recommend this product to anyone looking for an Affordable yet Reliable Cable Management Solution. And can’t forget to mention the Awesome Job this guys are doing at MainFrame: Super Fast Shipping, Excellent Customer Service, and Dave is always there to help ! Keep up the Great Work.
Best,
Gabriel D.
Hardware Engineer – Owner
G3 Corporation
(813) 551-1797
Gabriel –
boats86 (verified owner) –
I really like the clean look of these. I went with the black version because my build is black and neon green. The price is very good and honestly you get what you pay for. As others have mentioned they are very brittle one of mine snapped in half but I bought extras so it wasn’t a big deal. Other then that they look great and do a great job at organizing your wires. I think these combs should be made of a durable rubber vs the plastic I think that would make them less likely to snap while inserting your sleeves. If your sleeping double wires forget about these combs they won’t fit as the holes are pretty small.
boats86 –
bizzybisnette (verified owner) –
I agree with some of the reviews these are pretty brittle. I had to bend my cable more due to the motherboard clip being on the opposite side of then cable bend. Doing this I broke off about 8 from the 24 but it still looks good.
bizzybisnette –
GeneralZod1975 (verified owner) –
These are of good quality, sadly to a point. The 24 pin combs seem to break too easily if too much force is applied. It feels like they need to be of a thicker material, or even aluminum. I will be ordering 8 pin to comb my 24 pin connector to make it easier to comb and an appearance that will make it stand out. Use care if using these 24 pin combs!
GeneralZod1975 –
javierorosario (verified owner) –
I ordered both the 24 pin version and the 6 pin version and they add a sleek look to your wiring. When working with these remember to have your WHOLE connector wired up on one end, otherwise you will break them if you apply too much force. I destroyed the 24 pin version because of this and decided to go with the E22 Combs. Overall they are a great product and I highly recommend them.
javierorosario –
Pictish1 (verified owner) –
Like a previous reviewer I too found them smaller than I had pictured them in my mind. No matter, they appear to be resilient enough for the job and I am sure they
will add to the appearance of my new build. The items , 24 pin and 8 pin types were shipped to Scotland and arrived in good order. I will bear in mind what others
have said about the thickness of the wires to be use so thanks for the heads up.
Pictish1 –
jmbrill (verified owner) –
Bought the clear 6-pin, 8-pin, and 24-pin versions, and they all look fantastic! They’re much smaller than I expected them to be for some reason, but they feel solid and well-made. They’re very low-profile and keep individually-sleeved cables straight and orderly without drawing attention to them. These are the best alternative to cable sewing if you want to unobtrusively maintain the flow of your cables, and considering the time and effort required for that method, I’d say these are well worth the money.
Only thing is, I had a little trouble installing these on some of the earlier cables I sleeved since I wasn’t pulling the sleeving quite tight enough when I first started out. They were paracord on 18 AWG wires and I couldn’t get the wires through the comb because the paracord was bunched up too much. I ended up snipping the end of the sleeving and pulling it tighter, which worked but ended up making the comb installation process take way longer than I anticipated. I don’t regret it though because it resulted in bringing the sleeving in my rig up to my current quality standards.
jmbrill –
hoochbl (verified owner) –
My third order in 2015,
Great Customer Service,
item as per describe
great packing
will order again
hoochbl –
ezkc (verified owner) –
Bought a bunch of these in various sizes. Great quality. I had the same problem as Andrew H, had to redo all my wires with 18awg wires due to 16awg wires were too thick with sleeving. But I had fun making new wires. I had 1 issue tho, I thought the combs were suppose to be the same width as connectors, but when I had them on the wires, it created a funnel/fan out effect.
ezkc –
Andrew H (verified owner) –
These cable combs are much better than previous iterations. However if you plan on purchasing 16awg wire it will be a pain to thread the wire through the holes when you have a sleeve over it. It took me nearly as long to thread the cables through the holes as it did to make all of them. If they could only make the holes slightly larger they would be worthy of 5 stars. I would assume 18awg wire would provide a much easier thread. Just a heads up.
Andrew H –
Garrett Hardy (verified owner) –
Love the product. The only issue that I have is how hard it is to get it to fit when I am sleeving the cable. I have a 1400 watt power supply and I am not sure if the gauge of my wires are thicker than normal. But after I sleeve it and try to get these on it VERY tough. I almost wish I would of purchased ones that are not a full circle and you can snap it in at any time instead of while you are doing the sleeving. Maybe if they had different gauge options would that make it better.
Garrett Hardy –
Mikie (verified owner) –
These are awesome. Super fast shipping, and came nicely packaged. They fit perfectly on my cables. I busted one of the 24 pin ones. I still put it on, just a little closer to the connector. The wires hold the two pieces together just fine. A tiny dab of Superglue would make it permanent. In retrospect, I would have gotten a pack of the 16 hole ones instead of two of the 8 hole ones for my GPU power cables, but it looks fine as it is. All in all, pretty rad. Can’t go wrong.
Mikie –
rgrwng (verified owner) –
I think these are great. However, they are somewhat fragile! I broke one of the 24-pin ones in half, about halfway through sleeving the 24-pin. I was putting the wires through as i went along, and heard a *click* of doom.
i got the clear ones, and they look fantastic. Could not be happier with them, though i am now just using 2/3.
rgrwng –
cdl1701 (verified owner) –
Helps add a nice clean look to the cables and to keep them from separating.
cdl1701 –
Gary (verified owner) –
The best way to square off your sleeved cables but a bit on the pricey side for what they are.
Gary –
Francis (verified owner) –
I couldn’t be more happier that my cables look nicer, made huge difference. I ordered the 24, 8, and 6. Planning buying more on my next build.
Francis –
[email protected] (verified owner) –
Love these things! I bought a bunch of the 24 pin ones and if I need smaller I just bust out the Dremel and cut them up. Easy to use with the heatshrink-less method. If you DO use heatshrink, make sure you warm up the stuff before putting it through the holes, makes it much easier and less chance to break the sleeve from the wire.
[email protected] –
GaryBe (verified owner) –
I bought a bunch (24,16,8,6,4pin)of the Stealth Cable Combs and they all worked great. Super fast shipping.
GaryBe –
deon (verified owner) –
Really great product and good service to ship to Australia – worked well with my sleeving – will be getting more soon.
deon –
Dennis (verified owner) –
I purchased the 6, 8 and 24 pin LC Stealth Cable Combs. I like how these combs keep all my main cables tidy and gives my system that show room look.
Dennis –
Andrew (verified owner) –
So glad to see Mod Bunker now carrying Lutro0 products. This was my first order from them and will definitely not be my last. I ordered two 3 packs of the 24-pin combs and received the combs neatly packaged in two separate bags(3 per bag). They also had a nice little company tag stapled to the top. Just a nice little touch that you don’t see much in this world of custom computing.
Andrew –
mark (verified owner) –
really great service and it was sent when posted on the website. The LC stealth combs are great. I got 4 pin, 8 pin and 24 pin sets. It was clean and in there on bags. I would buy from mod bunker again.
mark –