You are looking at the Sata Power Crimp Terminal (5 count). This terminal is used on the Sata Crimp Style Connector and are of Molex Brand or Molex Brand quality.
We have searched high and low to bring you the best quality terminals that will hold firmly and work in any crimper out there. More-so these terminals will crimp perfectly in our Ratchet Crimping Tool.
We sell these in 5 counts as we believe this to be the best number to multiply by so you can have the right number of terminals.
Remember when buying terminals you should always buy at least 20 extra for mistakes and learning to crimp in the first place so you don’t have to make another order.
justash (verified owner) –
No complaints, easy to crimp and they come out looking great.
As an aside, if you break the pads off the end and one leg off, and squash the other leg a few times with some needle nose pliers… you can use two of these in tandem to extract Nvidia 12vhpwr terminals from their connector easily. I can’t think of anything else small and sturdy enough to do the same job without damaging the connector.
justash –
justash (verified owner) –
No complaints, easy to crimp and they come out looking great.
justash –
jdupain (verified owner) –
Perfect crimp with 16 gauge wire everytime. They made making Sata power cables a breeze!!
jdupain –
Lady Fitzgerald (verified owner) –
These are perfect for crimping more than one wire to a pin or crimping oversized wire, such as thickly insulated #14, but, for smaller wire, especially the wire MAINFrame sells that has thinner insulation, there is a tendency for one of the insulation wings to fold back on itself and leave a projection hanging down below the pin. For those situations, pins with shorter insulation wings will work better. I’m keeping both these pins and ones with shorter wings on hand so I’m covered for any situation I may encounter.
Lady Fitzgerald –